JET Table Saw 708675PK Delux Review
When it comes to table saws, the market is flooded with options. However, if you do not know what to look for in a table saw, chances are you will buy a model that is not suitable for what you need to get done. So knowing your table saw facts is essential to buy a table saw that meets your expectations.
The JET Table Saw is ideal for both professionals and DIY users. So basically this unit is easy to use as long as you know how to properly handle it. Although the motor is powerful, it is still not extraordinary. It contains a standard 3HP motor which is also found in various other models. This, however, does not mean that the unit is not reliable and efficient. It does contain safety features however, it could do with a few more. The 50-inch rip fence allows you to cut without any deviations whatsoever, so the device is extremely accurate, to say the least. It has a cast iron base, which makes it very durable and sturdy. So if you are looking for durability and stability, then this would do.
.
Pros | Cons |
[su_list icon=”icon: check” icon_color=”#00bf08″]
[/su_list] |
[su_list icon=”icon: frown-o” icon_color=”#990008″]
[/su_list] |
Top Jet Table Saw Questions
[su_accordion][su_spoiler title=”Are the dimensions listed that of the assembled saw or the size of the boxes it comes in?” open=”no” style=”fancy” icon=”plus” anchor=”” class=””]You can download the PDF manual and it will give you the guideline for the dimensions you need. Also the rollers for the extended table are not that great, but serve its purpose nonetheless. Otherwise, you should not be moving the table saw as it is heavy.[/su_spoiler] [su_spoiler title=”Where is the 4″ dust port located?” open=”no” style=”fancy” icon=”plus” anchor=”” class=””]On the bottom of the backside[/su_spoiler] [su_spoiler title=”How well will it cut heavy hard exotic woods 2″ thick and thicker?” open=”no” style=”fancy” icon=”plus” anchor=”” class=””]With a thin quality kerf blade, this machine does a great job. It all depends on the blade and the feed rate. If you get this right, the machine does a good job.[/su_spoiler][/su_accordion]
What’s My Take?
.
[su_tabs][su_tab title=”Basics” disabled=”no” anchor=”” url=”” target=”blank” class=””]As soon as you look at this table saw, you will know that it is of premium quality. So the production quality is very impressive. Everything about this table saw shows you the attention to detail that was used in the making of it. The design is conducive to precision and efficiency. One of the most outstanding features and benefits is that it has an outstanding performance, despite an average 3HP. This is mainly because the innovative design allows the machine to utilize every bit of its 3HP. The machine does give off some noise, although, it is definitely quieter than most of its competitors. Although the safety features are not that extensive, one of the key safety features is the riving knife. It quickly releases in order to prevent kickback. Another feature that seems to have customers smiling is the built-in storage drawer. While this is not an unusual or unheard of feature, it is not common as well. So it does make a nice addition to this strong and sturdy machine. It is versatile and the 50-inch fence with T square design improves and enhances the overall accuracy and performance of the machine.[/su_tab]
[su_tab title=”Features” disabled=”no” anchor=”” url=”” target=”blank” class=””]
Strong Construction/Built to last – The JET Table Saw 708675PK features a top to bottom all metal construction. The work surface contains finely ground cast iron. The heavy-duty trunnion located underneath the table is made of cast iron as well. This makes the machine stable and almost completely free of vibration.
Left Tilting Arbor for Burn Free Bevel Cuts – What this basically means is that the blade tilts away from the fence. This is a valuable feature when cutting bevels as the scraps end up on the table instead of being pinched between the blade and the fence. This, therefore, allows you to make precision cuts with damaging or burning the wood.
Convenient Miter Slot Alignment – Users can align the miter slot with the blade, by simply loosening 4 exterior hex screws. The miter gauge also allows you to create even more consistent crosscuts.
Dust Collecting Feature – The JET Table Saw 708675PK features a 4-inch dust port. The blade is fully covered which makes it easier for the dust to be collected.
Built-In Storage Drawer – This handy feature is sealed from the cabinet and allows you to store accessories within easy reach.
Safety Features – The machine contains a modular blade guard and this is one of its key safety features. It also has an anti-kickback pawl which keeps you as safe as possible while maintaining overall efficiency. This machine is considered pretty safe. However, it is recommended that you fully read and comprehend the instructions and user manual prior to using it.
[/su_tab]
[su_tab title=”Maintenance” disabled=”no” anchor=”” url=”” target=”blank” class=””]As with all machines, you need to exercise a certain level of pride when using it. You should basically keep the floor around the machine clean and clear of oil, grease and scrap metal. You should also provide adequate space between the work area and overhead lighting. Further instructions on how to keep your machine running optimally are included in the user manual.[/su_tab]
[su_tab title=”Accessories” disabled=”no” anchor=”” url=”” target=”blank” class=””]The JET Table Saw 708675PK comes with a stand. You are advised to only use accessories that are recommended for this table saw.[/su_tab][/su_tabs]
Who Can Use the JET 708675PK?
This table saw is designed for use by professionals and DIY users alike. While it is sturdy enough to perform heavy duty jobs, it is still easy enough to navigate by inexperienced users as well. So while it contains all the features, tools and benefits required by professional carpenters, it is still a well worth investment for DIY home users too.
What didn’t I like?
JET Table Saw 708675PK vs SawStop
The JET Table Saw is very similar to the Sawstop table saw. It contains more or less the same features such as the industrial T Glide fence, dust collection feature, poly v drive belt and various safety features as well. However, the JET 708675PK is still considerably cheaper.
The JET Table Saw 708675PKS vs Delta 36-L552 Unisaw
The Delta 36-L552 Unisaw has some great features. It contains similar features to the JET 708675PKS such as the anti-kickback safety feature, sturdy cast iron base and dust collecting port. However, this saw does pack a punch with an impressive 5HP as compared to the JET Table Saw 3HP.
JET Table Saw 708675PK vs shop fox w1819
The shop fox w1819 is much like the JET because it contains most of the same features such as dust collecting port, 3HP, sturdy cast iron construction and the anti-kickback safety mechanism.
What are users saying?
Customers are impressed by the sheer power of this machine considering it only contains 3HP. However, its design enhances the use of every bit of power. The stable and sturdy construction materials are impressive and lets you know it is built to last. Customers are happy with the safety features such as the industrial magnetic switch which cuts off power to the saw in the event of a power outage so that it won’t automatically power up when the electricity is restored.
My Final Thoughts:
This machine is a great buy if you are looking for premium quality at an affordable price. It will definitely impress you with its smoothness in performance. It contains adequate safety and performance features to get all types of jobs done. By using the machine correctly, it will give you decades of use.
.